Maintenance tips for your Bathroom

Levys Laffont Blogs

After remodeling plan.

 

 

As both a contractor and homeowner, I’ve seen the same bathroom issues come up again and again—mold starting in the shower grout, water spots on the glass doors, caulking wearing out sooner than expected, slow drainage from the P-trap, and corrosion on metal fixtures. Even a brand-new bathroom can develop these problems quickly in Florida’s humidity. The good news is that a few simple habits make all the difference. These are the exact tips I follow and recommend to my clients after completing a remodel.


1. Weekly or Bi-Weekly Shower Grout & Glass Spray Routine

One of the easiest ways to prevent mold and stains is to spray the shower grout and the glass door sealer weekly or every two weeks. I personally recommend ZEP Mold and Mildew Stain Remover (Home Depot). Spray it on, let it sit a few minutes, and rinse with warm water. This simple routine helps keep grout lines clean and prevents the early appearance of mold, especially in humid climates like Broward and Miami-Dade.


2. Keep Your Glass Door Clear Without Scrubbing

You don’t need to scrub or use harsh tools to keep your glass doors looking new. Every so often, use Rejuvenate 32 oz. Soap Scum Remover to remove soap, shampoo, and conditioner residue. Just spray, let it work, and rinse—no sponge or scrubbing required. This prevents buildup and protects the glass from long-term staining.


3. Always Use Your Exhaust Fan

I always tell homeowners: your exhaust fan is one of the most important tools in your bathroom. Turn it on before your shower, leave it running during, and let it run for at least 20 minutes after. This reduces humidity, slows mold growth, and protects your grout, paint, and cabinetry over time. In Florida, with constant moisture in the air, this step is essential.


4. Inspect Caulking and Grout Every 6–12 Months

It’s completely normal for grout to develop small cracks over time. Homes in Florida experience constant vibration from weather, traffic, and even ground movement, and these tiny shifts can affect the grout lines. That’s why it’s important to inspect both grout and caulking regularly. Remember: grout and caulking are not interchangeable.

  • Grout is for the spaces between tiles.
  • Caulking is for movement joints, corners, and transitions.

Using the wrong one in the wrong place can lead to peeling, cracking, or water intrusion. Keeping both maintained will protect your shower and help prevent leaks.


5. Gentle Cleaning for Fixtures & Metal Hardware

For faucets, shower fixtures, and metal hardware, avoid abrasive products that scratch or damage the finish. A mild disinfectant mixed with vinegar is usually enough to keep metal surfaces clean and free of mineral buildup without harming the protective coating.


6. Check the P-Trap Every Few Months

Every few months, take a quick look under your vanity to make sure the P-trap isn’t dripping or forming moisture around the connections. Tighten the slip nuts if needed and run warm water to clear any buildup. This simple check helps prevent bad odors and keeps your plumbing in good shape.

I hope these simple tips help you keep your new bathroom in excellent condition for many years. May it remain a relaxing, spa-like space where you and your family can unwind and enjoy peaceful moments every day.


Written by:
Levys Laffont
Licensed Contractor, MyHomeImproved.com